Security: Password is required to operate all menus
Coding Method: 8kbps High Quality Vector Quantisation providing
over 1600 hours on-line database of recordings.
Line Impedance: (Aus + USA) 6 K ohm
(AC) (NZ) 12 K ohm
(EUR) 67 K ohm
Line Impedance: (Aus /NZ/Europe) 1M ohm
(DC) (USA) 10M ohm
Frequency Response: 300-3400 Hz, +/- 0.5dBm
Signal to Noise: -34dBm.
Cross-talk: -60dBm.
Record (PIP) Tone: 1.4kHz. Channel and Level selectable
(Off, -33dBm, -27dBm, -21dBm)
Recording Triggers: Off-Hook or VOX (adjustable),
VOX Hi, -12dBm, Mid, -23dBm, Low, -29dBm
Internal Storage: Hard Disk Drive
CD Drive: 650 M Bytes IDE, uses CD Media for Archive
Display: 110 mm x 95-mm Graphics mode backlit LCD
Power Requirements: 90VAC - 260VAC, 50Hz - 75Hz
Max Line Voltage: Max Tip to Ring Voltage DC 250VDC
Max Tip to Ring Voltage AC 150V rms
Max Tip to Ground Voltage DC 1500VDC
Max Tip to Ground Voltage AC 1000V rms
Analogue Ports: 4,8,12, or 16 RJ11C/RJ12 (PSTN) line interface ports.
4-channel DSP interface uses pins 2/3
8-channel DSP interface uses pins 2/3 and 1/4
Line Out Jack (3.5mm stereo phono)
Headphone Jack (3.5mm stereo phono)
Serial Interface: (RJ45 connector), serial line interface, RS-232
57Kbps, Hardware Handsha ke
Client Software: Remote Recall (Windows 95/98/XP/NT), (inclusive)
System Software : Field upgradeable via CD Media
